Ürün ayrıntıları:
|
Şart: | Orijinal yeni | Garanti: | 12 ay |
---|---|---|---|
Nakliye terimi: | DHL / TNT / UPS / FEDEX vb. | ||
Vurgulamak: | pil uzatma modülü,fc sdo 0824 |
Açıklama
The vertical buses (V-Buses) in the FSC system are the umbilical cord between the processor and the I/O modules. FSC sistemindeki dikey otobüsler (V-Bus) işlemci ve I / O modülleri arasındaki göbek kordonudur. All scan, test and update actions between the processor and I/O modules in I/O racks are routed via one or more vertical buses. I / O raflarındaki işlemci ve G / Ç modülleri arasındaki tüm tarama, test ve güncelleme eylemleri bir veya daha fazla dikey veri yolu üzerinden yönlendirilir. The V-Bus is a 34-wire flatcable with connectors for the VBD(s), connectors for the HBD(s), and a connector for the vertical bus terminator (10307/1/1). V-Bus, VBD (ler) için konektörler, HBD (ler) için konektörler ve dikey veriyolu sonlandırıcı için bir konektör (10307/1/1) bulunan 34 telli bir yassı kablodur. Large systems (using more than one cabinet) need a V-Bus link from the cabinet with the CP part(s) to the cabinet that only contains I/O racks. Büyük sistemler (birden fazla kabin kullanan), CP parça (lar) ı olan kabinten sadece G / Ç rafları içeren kabin ile bir V-Bus bağlantısına ihtiyaç duyar. This V-Bus link consists of a 34-wire round "flatcable" with connector(s) for the VBD(s) and a connector for the V-bus in the dedicated I/O cabinet. Bu V-Bus bağlantısı, VBD (ler) için konektör (ler) içeren 34 telli yuvarlak "düz kablo" ve özel G / Ç kabinindeki V-bus için bir konektörden oluşur. The type of V-Bus that is required depends on three things: • the configuration (redundant Central Parts and/or I/O), • the cabinet layout (eg racks with redundant I/O followed by racks with non-redundant I/O), and • the integration method (HBD type 10100/1/1 vs. 10100/2/1 with 10314, 10315, 10316 or 10317 backplanes). Gereken V-Bus tipi üç şeye bağlıdır: • yapılandırma (yedek Orta Parçalar ve / veya G / Ç), • kabin düzeni (örn. Yedek G / Ç'li raflar ve yedeksiz G / Ç'li raflar O) ve • entegrasyon yöntemi (HBD tip 10100/1/1 ve 10100/2/1 ile 10314, 10315, 10316 veya 10317 arka düzlemleri).
Ordering V-Buses Ordering a V-Bus flatcable requires all relevant cabinet layout data (including dimensions). V-Bus siparişi verme V-Bus düz kablo siparişi vermek, ilgili tüm kabin yerleşim verilerini (boyutlar dahil) gerektirir. As CE and TÜV approval is required in more and more systems, the use of standard cabinet layouts has become common practice. Daha fazla sistemde CE ve TÜV onayı gerektiğinden, standart kabin düzenlerinin kullanımı yaygın bir uygulama haline gelmiştir. This enables simplified V-Bus ordering information. Bu, basitleştirilmiş V-Bus sipariş bilgilerini etkinleştirir. The V-Bus code can only be used if the cabinet layout and the VBD positioning meet all of the following requirements: • The VBD must have rack position 14, 15 or 16. • The VBDs of a V-Bus for configurations with redundant Central Parts and non-redundant I/O must have the same rack position number in both CP racks (eg VBD1: rack 1, position 15, and VBD2: rack 2, position 15). V-Bus kodu yalnızca kabin yerleşimi ve VBD konumlandırması aşağıdaki tüm gereksinimleri karşılıyorsa kullanılabilir: • VBD'nin raf konumu 14, 15 veya 16 olmalıdır. • Yedekli Merkezi olan yapılandırmalar için V-Bus'ın VBD'leri Yedek parçalar ve yedeksiz G / Ç, her iki CP rafında da aynı raf konum numarasına sahip olmalıdır (örn. VBD1: raf 1, konum 15 ve VBD2: raf 2, konum 15). • Every rack with its S-Bus, 1-Bus or 2-Bus is 4 HE (4U) high. • S-Bus, 1-Bus veya 2-Bus özellikli her raf 4 HE (4U) yüksekliğindedir. • The CP rack(s) must be the first rack or the first two racks. • CP raf (lar) ı ilk raf veya ilk iki raf olmalıdır. • There are only FSC racks between the first CP rack and the last I/O rack • İlk CP rafı ile son G / Ç rafı arasında yalnızca FSC rafları vardır
• The redundant I/O racks are placed in one consecutive row of racks (per cabinet). • Yedekli G / Ç rafları, ardışık bir raf sırasına (dolap başına) yerleştirilir. • The non-redundant I/O racks are placed in one consecutive row of racks (per cabinet). • Yedeksiz G / Ç rafları, ardışık bir raf sırasına (dolap başına) yerleştirilir. If there is a deviation from any of these rules, the V-Bus order must include a full description of the required V-Bus Bu kuralların herhangi birinden sapma varsa, V-Bus sırası gerekli V-Bus'un tam bir açıklamasını içermelidir
Ironman Technology Co, LTD
Öne Çıkan Marka:
● BALAYI ● AB ● OMRON ● SIEMENS ● SCHNEIDER
● ROSEMOUNT ● ABB ● NOTIFIER ● MTL ● GE ● Ve daha fazlası!
Honeywell 10100/2/1 Yatay Veri Yolu Sürücü Modülü Fazlası 65mA 5VDC 1010021
Teslim süresi: 3-5 gün
Bir yıl garanti ile yeni
İlgili kişi: Sales Manager
Tel: +8613510133539